Basic Operations

1. OPENING AND CLOSING THE DISC TRAY/LOADING DISCS

This is an electronic operation and can only work when the power is on. Press the OPEN/CLOSE BUTTON (10) to open or close the disc tray. Pressing the PLAY/PAUSE BUTTON (29), will also automatically close the tray if it is open and immediately cue any CD that is in it. If the transport tray is left open for more than 60 seconds it will close automatically to prevent accidental damage to the transport. Again if a CD is left in the transport tray it will immediately cue to the first song. The disc trays cannot be opened during playback to prevent playback from being interrupted if the OPEN/CLOSE BUTTON (10) is pressed accidentally. Stop playback, then press the OPEN/CLOSE BUTTON (10).

2. LOADING DISCS

The DIGI-PRO can play both 3 inch (8 cm) and 5 inch (12 cm) compact discs (CD’s). Odd shaped and oval CD’s are not compatible. When loading a CD into the unit always hold the disc by its' edges and place it in the disc tray. Never touch the signal surface (the glossy side). When using 5 inch/12 cm discs, place the disc in the outer tray guides (figure 7), and when using 3 inch/8 cm discs, place them securely in the inner guides (figure 8).

CAUTION:

•NEVER insert any foreign objects in the disc tray.

•NEVER attempt to insert more than one disc in the disc tray at a time. Doing so may result in severe damage to the unit.

•NEVER force the transport tray open or closed when the power is off, as this may and damage the transport system.

5 in. / 12cm disc

Figure 7

3 in. / 8cm disc

Figure 8

result in malfunction

3. SELECTING TRACKS

Select a desired track by using either of the two TRACK BUTTONS (20 & 21). Tapping the TRACK BUTTONS (20 & 21) once will select either a higher or lower track. You may hold down the TRACK BUTTONS (20 & 21) to change tracks continuously at a higher speed. If you are using the TRACK BUTTONS (20 & 21) to select a new track during playback (a track already playing) the new track you selected will immediately begin playback as soon as the search operation is completed.

4. STARTING PLAYBACK

Insert an audio CD as describe above (loading discs). Pressing the PLAY/PAUSE BUTTON (29) with an audio CD inserted will immediately start playback. The PLAY INDICATOR (53) will glow as soon as playback begins. The point at which playback starts (cue point) will automatically be stored in the memory as the cue point. The unit will return to this cue point (the point at which playback started) when the CUE BUTTON (27) is pressed.

5. STOPPING PLAYBACK

Stopping playback will not stop the drive mechanism, but merely pause or cue the track. There are two ways to stop playback:

1)Press the PLAY/PAUSE BUTTON (29) during playback to pause at that point.

2)Press the CUE BUTTON (27) during playback to return the track to it’s last cue point.

6. PAUSING

Pausing temporarily stops playback. Pressing the PLAY/PAUSE BUTTON (29) changes the operating mode between play and pause. The PAUSE INDICATOR (54) in the LCD (14) will glow when pause mode is activated or when a track is in cue mode.

7. AUTO CUE

”Cueing” is the action of preparing for playback. When the unit is in cue mode the CUE INDICATOR (51) in the LCD (14) will glow. The unit is designed to automatically cue at the first audible signal on the first of a disc when a disc is inserted. If a track is selected before a disc is inserted, the unit will automatically cue to the first audible signal for the selected track.