ADVANCED OPERATIONS CONT.
FILTER EFFECT: The filter is a type of dampening effect that tweaks with the harmonics of a track. This effect uses a low and high filter to distort the an audio track. The effect works with both the low and high filters simultaneously.
To activate the FILTER effect be sure the DTA/FX BUTTON (22) is off and press the FILTER BUTTON (3). When the FILTER effect is selected the "1" icon displays in the LCD (14).
Figure 39
4. FILTER OPERATION - Once the filter has been engaged, use the PITCH SLIDER (23) to change the type of filer being applied. The filter parameters range from
Figure 40
5. FILTER PARAMETER HOLD - To lock the filter at a specific parameter press the PRG/HOLD FX BUTTON (13). This will engage the hold function which will lock your desired filter parameter and set a new default value. Your default value will be erased once the unit is powered off.
Figure 41
6. FILTER LOOP FUNCTION - To lock the filter in a loop, press the FILTER/COAST/ADJUST BUTTON (1) while in the filter effect mode. This function will lock the filter effect in a continuos effect until the FILTER/COAST/ADJUST BUTTON (1) is disengaged.
Figure 42
7. FILTER TIME PARAMETER - The filter effect has an adjustable time parameter of 10msec to 9.9 seconds. This is the amount of time it takes the filter to cycle through the low and high pass filters. This parameter can be adjusted at any time once the filter effect has been activated, by turning the jog wheel in either direction.
Figure 43
American Audio® •