ENGLISH
•Select
Uninstall.
•Click OK, then Finish.
•Now You can remove the Adapter.
6 Troubleshooting
Common Problems and Solutions
This chapter provides solutions to problems that may occur during the installation and operation of the WLAN 802.11g USB Adapter. Read the descriptions below to solve your problems.
1.My computer cannot find the Adapter
Make sure the Adapter has no physical damage.
Make sure the Adapter is properly inserted into USB slot.
Try the Adapter in other USB slots.
Try another Adapter in that particular USB slot.
2.Cannot access any network resources from the computer. Make sure that
the notebook PC is powered on.
Make sure that the notebook PC is powered on.
Make sure that the Adapter is configured with the same SSID and security options as the other computers in the infrastructure configuration.
Disable “Windows XP Wireless Zero Configuration
In Windows XP, it is recommended that you use the WLAN 802.11g Utility. Right after the installation, before opening the Utility, please follow the steps below to disable the Windows XP Zero Configuration:
1Go to “Control Panel” and double click “Network Connections”.
2
3Select “Wireless Networks” tab, and uncheck the check box of “Use Windows to configure my wireless network settings”, and then click “OK”.
Frequently Asked Questions
1.Can I run an application from a remote computer over the wireless network?
33