Atlantis Land S 173 user manual How to adjust a setting, Adjusting the picture

A05-17AM-L02_MX01

•Contrast :

Adjust contrast or adjust function.(tone up the volume while have the audio frequency)

•MENU ：

Activate the OSD menu or confirm the function adjusting.

•Power Key ：

Press this button to switch ON/OFF of monitor’s power.

•Power Indicator:

Blue/Green ---- Power On mode. Orange/Red ---- Off mode.

3.2 How to adjust a setting

1.Press the MENU button to activate the OSD window.

2.Press or to select the desired function, then press the MENU button again.

3.Press or to change the settings of the current function ,press the MENU button to confirm it.

4.If you want to adjust any other function, repeat steps 2-3.

5.If you want to exit the OSD image, select the “exit function/EXIT OSD”, or leave the monitor alone for 20 seconds (Windows default), the OSD window will close and sure automatically.

6.When the OSD window is active, it shows the input signal timing.

3.3 Adjusting the picture

1. BRIGHTNESS

1.1Auto gain control: Adjust the gain automatically.

1.2Brightness: Adjust the brightness automatically.

1.3Contrast: Adjust the contrast automatically.

1.4Exit

2. COLOR (In the state of DVI without this item)

2.1Auto color: Adjust the color automatically.

2.2Exit

11