Motorola 579765-003-00 Rear View, Enable Wireless Protected Setup WPS on your Wi-Fi devices

Page 5

When all of your connections are made, your network may look like this:

Rear View

 

Ethernet

 

 

 

Ports

WPS

DSL Port

 

Pushbutton

 

 

 

 

 

Power Switch

DC Power

ENGLISH

4.Enable Wireless Protected Setup (WPS) on your Wi-Fi devices.

Adding wireless clients to your network is easier using Wireless Protected Setup (WPS). Older, non-WPS clients can still be added to the network by configuring them the stan- dard way with WPA-PSK.

Make sure your wireless clients are running. Press the WPS push-button to begin the exchange, which may last up to two minutes.

Do not power off your Gateway during the exchange.

The Gateway will display a success message when the exchange has completed.

Note: Not all client wireless devices support WPS. Refer to their documentation.

5

Image 5
Contents Page English Safety InformationChecklist Connections Power the GatewayDecide on a location for the Gateway Insert the Motorola Netopia CD into your Cdrom driveRear View Enable Wireless Protected Setup WPS on your Wi-Fi devicesBehavior Power Ethernet 1, 2, 3 WirelessActivity Internet DSL Device Configuration English Required Information Your entries Client Configuration Internet ProtocolVersion 4 TCP/IPv4 Apple Menu -Control Panels -TCP/IP Control Panel Why is my DSL light flashing green? FAQsEnglish Basic Troubleshooting LED Function Summary PowerIf LED is Possible problems Net cable is thicker than the standard telephone cable 3,4Support Umweltschutz durch Recycling Recyclage pour le respect