CONNECTIONS
Example 2. One X-AS100 with a pair of X-A50s or X-A200s
In our second example, a pair of X-A200s are used to drive the bass unit (woofer) of each channel whilst an X-AS100 is used to drive the treble unit (tweeter) of each channel. The X-AS100 is connected to a preamp in the normal way with a pair of phono leads. Then the line input of each X-A200 (or X-A50) is connected to a 'Loop Out' of the X-AS100 with another set of phono leads. The X-AS100's Mono/Stereo button must be out for stereo operation. The X-A200s in this example drive the left and right bass units whilst the X-AS100 drives the left and right tweeter.
To Preamp | To Preamp |
Right line output | Left line output |
| Mono/Stereo button 'out' |
| for Stereo operation |
Right Speaker | Left Speaker |
If you have any questions regarding passive bi-amping please contact your authorised Musical Fidelity dealer who should be able to help and advise you.
EXTERNAL POWER SUPPLY
We recommend that the Power Supply Unit be positioned on the floor as far away from the X-AS100 as possible. This ensures that there is no magnetic interaction between the X-AS100 and the power supply unit thus giving best performance.
The X-AS100 has been designed so that it may be left switched on indefinately if desired.
WARNING - Heat
When in use the X-AS100 gives off heat from its casework.
Never put anything on top of your X-AS100.
Always ensure that the unit has adequate ventilation.
X-AS100 | Instructions For Use. Page 7 |