Musical Fidelity X-AS100 Installation Precautions, þHeed all warnings on the back of the unit

INSTALLATION

INSTALLATION PRECAUTIONS

Your new X-AS100 is designed and built to provide trouble-free performance but as with all electronic devices it is necessary to observe a few precautions. Please ensure that you have complied with them before you connect any AC power to your ampli- fier. Retain this guide for future reference.

þHeed all warnings on the back of the unit.

þPlace your X-AS100 where there is adequate ventilation.

þOnly connect the unit to a power supply of the type marked on the back of the unit.

þPosition the power supply lead and signal interconnect leads where they are not likely to be walked on or trapped by items placed on them.

BEFORE YOU SWITCH ON

ýDo not use near water.

ýDo not place the amplifier near direct heat sources such as radiators or other equipment that produces heat.

ýDo not remove any covers or try to gain access to the inside. The war- ranty will be invalid if the unit has been tampered with. There are no user adjustments within. Refer all service work to an authorised Musical Fidelity agent.

ýThere are fuses in the X-AS100. In the unlikely event that one blows, take your X-AS100 to your audio dealer. Do NOT try to replace the fuse yourself or you will invalidate the warranty.

You should make all connections to the X-AS100 before switching on.

Follow this routine before you listen for the first time, and each time you change any connections.

1Check all the inputs and outputs to the X-AS100.

2Then check again.

3Turn the volume control to nil.

4Now you can switch on the power and carefully advance the volume to the level you want and enjoy the music.

X-AS100 Instructions For Use. Page 4