Motorola SBG941U Field Descriptions for the Advanced IP Filtering, Start Address, End Address

B

Advanced IP Filtering Page

This page allows you to define which local PCs will be denied access to the SBG941 WAN. You can configure IP address filters to block Internet traffic to specific network devices on the LAN by entering starting and ending IP address ranges.

Note: Only enter the LSB (Least-significant byte) of the IP address; the upper bytes of the IP address are set automatically from the IP address for the SBG941 Configuration Manager.

	Field Descriptions for the Advanced IP Filtering Page
Field	Description
Start Address	Enter the starting IP address range of the computers for which you
	want to deny access to the SBG941 WAN. Only enter the least
	significant byte of the IP address.
End Address	Enter the ending IP address range of the computers you want to
	deny access to the SBG941 WAN. Only enter the least significant
	byte of the IP address.
Enabled	Activates the IP address filter, when selected.
	Select Enabled for each range of IP addresses you want to deny
	access to the SBG941 WAN.

When done, click Apply to activate and save your settings.

Advanced Pages • Advanced IP Filtering Page

Motorola SURFboard SBG941 Series Wireless Cable Modem Gateways • User Guide 33

570280-001-a