Motorola manual WSM6300 Installation Procedure, WSM Serial Cable, Signal, Orange

MEA WSM6300 Users Guide

WSM6300 Installation Procedure

1.Mount the WSM6300 in a suitable location. The device is environmentally sealed. Refer to the Deployment section of this document and the MEA Guidelines for Network Deployment manual for deployment location recommendations.

WARNING

The WSM6300 chassis must be grounded to prevent the possibility of damage induced by Electro Static Discharge (ESD).

2.Connect the antenna or antenna cable to the to the N-type antenna port.

3.Insert the Power Plug / Serial connector into 6-pin connector port.

	Figure 2. WSM Serial Cable
Pin Number	Signal	Power/Serial Cable Color
1	PWR GND	Black
2	5 – 14.0 VDC	Red
3	GPIO5 (0 to 3.3 V)	Blue
4	TX(RS-232) or A+(RS-485) – from ASIC	Brown
5	RX(RS-232) or B-(RS-485) – to ASIC	Orange
6	Signal GND	Black

3