Motorola 2247/57-62 Rear View, Enable Wireless Protected Setup WPS on your Wi-Fi devices

Page 5

When all of your connections are made, your network may look like this:

Rear View

	Ethernet
	Ports		WPS
DSL Port			Pushbutton

Power Switch

DC Power

ENGLISH

4. Enable Wireless Protected Setup (WPS) on your Wi-Fi devices.

Adding wireless clients to your network is easier using Wireless Protected Setup (WPS). Older, non-WPS clients can still be added to the network by conﬁguring them the standard way with WPA-PSK.

Make sure your wireless clients are running. Press the WPS push-button to begin the exchange, which may last up to two minutes.

Do not power off your Gateway during the exchange.

The Gateway will display a success message when the exchange has completed.

Note: Not all client wireless devices support WPS. Refer to their documentation.

5

Image 5

Contents Page English Safety InformationChecklist Connections Power the GatewayDecide on a location for the Gateway Insert the Motorola Netopia CD into your Cdrom driveRear View Enable Wireless Protected Setup WPS on your Wi-Fi devicesFront View Select your language from the pull-down menu and click Next Device ConﬁgurationBrowser displays the Internet Login Register your Motorola Netopia Gateway Record your subscriber information here for future reference Windows XP follows a path like this Client ConﬁgurationEnglish Apple Menu -Control Panels -TCP/IP Control Panel Why is my DSL light ﬂashing green? FAQsHow do I register my Motorola Netopia Gateway? Basic Troubleshooting LED Function Summary If LED is Possible problems Support SupportRecycling bei Geräten von Motorola Recyclage pour le respect de lenvironnement