1Default Configuration for New ZealandThis router is shipped with the following factory default settings.Router IP address192.168.1.1
Subnet mask | 255.255.255.0 |
VPI | 0 |
VCI | 100 |
Connect mode | PPPoA |
NAT | enabled |
DSL line mode | auto select G.DMT / T1.413 |
WAN IP | dynamic |
DHCP | enabled |
DNS relay | on |
UPnP IGD | enabled |
Firewall incoming | on |
Firewall outgoing | off |
Router configuration & management: | |
User name | admin |
Password | admin |
Telnet password | admin |
If your ISP specifies that your ADSL service is PPPoE, connect mode must be changed to PPPoE LLC/SNAP. Instructions will follow. Check with your ISP if you are unsure of the type of service you have subscribed to. Advanced users who have other setup preferences should first read the User’s Manual.
2Before you start
Make sure your computer has these installed:
Ethernet or USB port
TCP/IP protocol enabled
A web browser, Internet Explorer 5.0/Netscape 6 or better.
Obtain your Internet account information from your ISP:
Login user name and password
Public IP address (only if you subscribe for static IP)
DNS server IP (only if specified by ISP).