ADSL Router Quick Set-up Guide
Windows 98/ME:
1.From Control Panel, double click Network. Scroll down to highlight TCP/IP
2.Select the IP Address tab. Specify 192.168.1.x (x is a number you pick between 2 and 254). This is the IP address you assign to the computer. Subnet Mask is 255.255.255.0.
3.Select Gateway tab. Enter the router’s IP address 192.168.1.1. Click Add. If your ISP specifies DNS server addresses, go to the tab DNS Configuration. Enter the specified addresses according to the ISP’s instructions.
4.Click OK & then OK to finish. The system may ask to read the
Windows CD, and then ask to restart the computer.
You have now finished with configuring your computer.
Go to Section 5 – Getting
5Getting
Start your web browser. Enter the default address http://192.168.1.1. Type admin for both User name and Password.
See Q1 in Section 10 - Troubleshooting if you cannot get this screen.
Next you will be in the Quick Start >
Connect to Internet page.
If your ISP specifies that your ADSL service is PPPoE, you must now follow Section 6 to change the router’s connect mode to PPPoE. Check with
your ISP if you are unsure of the type of service you have subscribed to.