OPERATING THE SELF-CLEANING OVEN
(continued)
How to Set Oven for Cleaning
Quick Reminder:
1.Prepare the oven for cleaning.
2.Close the oven door.
3.Press the CLEAN pad.
4.Press the INCREASE or DECREASE pad to set the clean time.
1.Follow steps to prepare the oven for cleaning.
2.Close the oven door.
IICLEAN
4.Press the INCREASE or DECREASE pad until the desired Clean Time
is displayed.
Clean Time is normally 3 hours. You can change the Clean Time to any time between 2 and 4 hours, depending on the amount of soil in your oven.
The
NOTE: A fan may automatically turn on and off to cool internal parts. This is normal, and the fan may continue to run after the oven is turned off.
To Stop a Clean Cycle
1.Press the CLEAR/OFF pad.
2.When the LOCK light goes off and the oven has cooled below the locking temperature, open the door.
After a Clean Cycle
When the clean cycle is finished, the word “CLEAN” will go out in the display and the oven will begin to cool. When the oven temperature has fallen below the locking temperature, the word “LOCK” goes out and the door can be opened.
When the LOCK light is off and the oven has cooled below the locking temperature, open the door.
After a clean cycle, you may notice some white ash in the oven. Just wipe it up with a damp cloth.
If white spots remain, remove them with a
If the oven is not clean after one clean cycle, the cycle may be repeated.
If the shelves have become hard to slide, wipe the shelf supports with cooking oil.
26
