GE JGSP31, JGSP40 How to Set Delay Start of Cleaning, Quick Reminder-Delay Start for Self-Clean

How to Set Delay Start of Cleaning

Delay Start is setting the oven timer to start the clean cycle automatically at a later time than the present time of day.

NOTE: Before beginning make sure the oven clock shows the correct time of day.

For example: Let’s say it’s 7:00 and you want the oven to begin self-cleaning at 9:00 after you’re finished in the kitchen. The oven is just soiled a normal amount so the normal Clean Time of 3 hours is preferred.

1. Prepare the oven for cleaning.

2. Close the oven door. Make sure the oven light is off.

n 3. Press the CLEAN pad.

CLEAN

~ 4. Press the INCREASE uad. Three hours

A cleaning time is automatically set.

II~

5.If a longer or shorter Clean Time is desired, press the INCREASE or DECREASE pad until the desired Clean Time is displayed.

STOP	6. Press the STOP TIME pad. “10:00”
	appears in the display and “STOP
TIME	TIME” flashes. The control
c1	automatically sets the Stop Time
	by adding the Clean Time to the time
	of day.
	In this example, the time of day is 7:00
	and the Clean Time is 3 hours. Adding 3
	hours to the time of day equals 10:00.

Quick Reminder—Delay Start for Self-Clean:

1.Prepare the oven for cleaning.

2.Close the oven door.

3.Press the CLEAN pad.

4.Press the INCREASE or DECREASE pad until the desired Clean Time appears.

5.Press the STOP TIME pad.

6.Press the INCREASE or DECREASE pad until the desired Stop Time appears in the display.

7.Change the Stop Time from 10:00 to 12:00 by pressing the INCREASE pad until “12:00” appears in the display. The words “DELAY CLEAN” will also appear in the display.

The self-clean cycle will automatically begin at 9:00 and finish at 12:00. The word “ON” will appear in the display at 9:00.

When the oven heats to a high temperature,

the word “LOCK” will be displayed and the door will be locked in position. It will not be possible to open the oven door until the temperature drops below the lock temperature.

When the clean cycle is finished, the word “CLEAN” will go out in the display and the oven will begin to cool. When the oven temperature has fallen below the locking temperature the word “LOCK” goes out and the door can be opened.

8. When the LOCK light is off, open the door.

NOTE: A fan may automatically turn on and off to cool internal parts. This is normal, and the fan may continue to run after the oven is turned off.

(continued next page)

27