■External Program Timer
The internal timer can be changed to the specified timer previously programmed by the input from the external timer. This function is enabled, when a contact is connect- ed with pin 22 of the ALARM port.
This item lets you enable or disable the external timer for recording.
1.Move the cursor to the EXT REC MODE parameter in the TIMER REC SETUP menu by pressing the D or C button.
2.Select the desired program to be changed by pressing the + or - button.
PROG1 - 4: Selects a timer assigned program number.
The factory default setting is
3.Press the SET button to display the assigned program number menu previously programmed.
If the program number menu has not been edited previ- ously, edit the assigned program number menu as described before.
4.Press the SETUP/ESC button to return to the previous setup menu.
■Time Lapse Recording (Internal Timer)
These items let you set the recording parameters for Time Lapse Recording assigned in the program number menu.
(Continued from Program Timer)
1.Select the recording mode T/L in the program number menu by pressing the + or - button, then press the SET button.
The selected Time Lapse Recording menu shown below appears on the monitor screen.
T/L(TIME LAPSE)
TIMER | REC MODE | SF- 24H |
REC | RATE | 7.5FPS |
QUALITY | SUPER FINE | |
TRIGGER ACTION | REC+ALM | |
EVENT REC MODE | SF- 24H | |
REC | RATE(MAX) | 7.5FPS |
REC | QUALITY | SUPER FINE |
DURATION | 10S | |
DYNAMIC REC | OFF | |
REC | RATE(BASE) | 1FPS |
AUTO COPY | OFF | |
2.Move the cursor to the TIMER REC MODE parameter in the menu by pressing the D or C button.
3.Select the recording time mode to be set by pressing the + or - button.
OFF: Disables normal recording and enables only alarm recording.
SP or
✽✽indicates the hours for recording time mode:
2, 12, 18, 24, 48, 72, 96, 120, 180, 240, 360, 480, 720, 960, 1200, 1440, 2160, 2880, 3600, 4320, 6480, 8640
(parameter A* indicates recording with audio)
When the parameter SF/FQ/NQ/EX is selected for recording time, the recording rate and quality are auto- matically set according to the selected recording time.
Note: It may not be possible to set the recording time, depending on the remaining storage capacity of the hard disk.
The factory default setting is
4.If the parameter SP is selected for recording time, move the cursor to the REC RATE parameter by pressing the D or C button, then select a recording rate by pressing the + or - button.
1 - 60FPS: Records the selected number of freeze images every second.
0.5FPS: Records a freeze image every 2 seconds.
0.4FPS: Records a freeze image every 2.5 seconds.
0.3FPS: Records a freeze image every 3.3 seconds.
0.2FPS: Records a freeze image every 5 seconds.
0.1FPS: Records a freeze image every 10 seconds.
Notes:
•The maximum recording rate depends on the selected parameters in the COMMON SETUP menu as shown in the table.
FIELD/FRAME | CAMERA GENLOCK | REC RATE |
FIELD | ON | 60FPS |
| OFF | 30FPS |
FRAME 3DIM | ON | 10FPS |
ON | OFF | 10FPS |
FRAME 3DIM | ON | 30FPS |
OFF | OFF | 15FPS |
52
