■Mounting into the Rack
The Disk Recorder can be mounted into the rack as described below.
1.Remove the four rubber feet by removing the four screws from the bottom of the Disk Recorder.
•
|
| FS | 16 |
• |
|
|
|
• |
| Disk |
|
| Digital |
| |
| RecorderA |
| |
| 500 |
| |
Remove 4 rubber feet
2.Place the rack mounting brackets Disk Recorder and tighten with screws (M4 X10).
on both sides of the the four supplied
•
•
FS | 16 |
• |
|
Digital Disk | |
Recorder | |
500A | |
3.Install the Disk Recorder with the rack mounting brack- ets in the rack, securing it with four screws (not includ- ed).
•
•
FS | 16 |
• |
|
D |
|
igital Disk | |
Recorder | |
500A | |
Cautions:
•The cooling fan inside the Disk Recorder is subject to wear and needs to be replaced periodically.
•Do not block the ventilation opening or slots in the cover to prevent the appliance from overheating. Always keep the temperature in the rack below 45°C (113°F).
•If the rack is subject to vibration, secure the rear of the appliance to the rack by using additional mounting brackets (procured locally).
15
