■Hard Disk End Setup
This item lets you enable or disable uninterrupted recording when the hard disk space is used up.
1.Move the cursor to the HDD DISKEND parameter in the COMMON SETUP menu by pressing the D or C but- ton.
2.Select the desired mode by pressing the + or - but- ton.
STOP: Stops recording when the disk is full.
CONTINUE: Continues recording by overwriting the oldest data when the disk is full.
ALM CONTINUE: Continues only recording the data while an alarm is activated by overwriting the oldest data, when the disk is full.
The factory default setting is STOP.
Manual Recording Setup
The Disk Recorder can be recorded the images in Time Lapse recording when the REC button is pressed manually. Manual Recording is disabled when the TIMER in the setup menu is set to something other than OFF.
These settings are also valid for External Timer Recording when the TIMER in the setup menu is set to EXT.
These items let you determine the image quality and active mode for manual recording.
1.Move the cursor to MANUAL in the
2.Pressing the + or - button will toggle the display on the cursor as shown below.
→MANUAL WITH AUDIO → MANUAL WITHOUT AUDIO →
3.Pressing the SET button will call up the MANUAL REC SETUP menu according to the specified audio function, as shown below.
2 MANUAL REC SETUP(WITHOUT AUDIO)
MANUAL REC MODE | SF- 24H | |
REC | RATE | 7.5FPS |
REC | QUALITY | SUPER FINE |
EVENT | REC MODE | SF- 24H |
REC | RATE(MAX) | 7.5FPS |
REC | QUALITY | SUPER FINE |
DURATION | 10S | |
DYNAMIC REC | OFF | |
REC | RATE(BASE) |
|
TRIGGER ACTION SETUP 
4.To return to the previous
■Manual Recording Mode Setting
1.Move the cursor to the MANUAL REC MODE parameter in the MANUAL REC SETUP menu by pressing the D or C button.
2.Select the recording time mode to be set by pressing the + or - button.
SP or
48
