Panasonic WJ-HD500A manual Multi Shot Recording Internal Timer

■Multi Shot Recording (Internal Timer)

As described before, the Multi Shot Recording is an event recording function reacting to an alarm input.

It records the number of images in pre- and post-recording. Pre-recording is the recorded images during standby, prior to the input of the alarm signal.

Post-recording is the recorded images after the input of the alarm signal.

These items let you determine the recording parameters for Multi Shot Recording assigned in the program number menu.

(continued from Program Timer)

1.Select the recording mode M/S in the program number menu by pressing the + or - button, then press the SET button.

The selected Multi Shot Recording menu as shown below appears on the monitor screen.

3-1-1-1 PROG1-NO1-G1 REC SETUP

M/S(EVENT:MULTI SHOT)
TRIGGER ACTION	REC+ALM
REC MODE
REC RATE	15FPS
REC QUALITY	SUPER FINE
PRE PICTURES	15
	XXX.X/CAM
POST PICTURES	60
DYNAMIC REC	OFF
AUTO COPY	OFF

2.Move the cursor to the TRIGGER ACTION parameter in the menu by pressing the D or C button, then select an active mode for group cameras when an alarm is received by pressing the + or - button.

REC+ALM: Enables alarm recording and alarm activa- tion.

REC: Enables only alarm recording.

The ALARM display on the monitor is also disabled.

The factory default setting is REC+ALM.

3.Move the cursor to the REC RATE parameter in the menu by pressing the D or C button, then select the desired recording rate by pressing the + or - button.

1 - 60FPS: Records the selected number of freeze images every second.

0.5FPS: Records a freeze image every 2 seconds.

0.4FPS: Records a freeze image every 2.5 seconds.

0.3FPS: Records a freeze image every 3.3 seconds.

0.2FPS: Records a freeze image every 5 seconds.

0.1FPS: Records a freeze image every 10 seconds.

The factory default setting is 15FPS.

Notes:

•The maximum recording rate depends on the selected parameters in the COMMON SETUP menu as shown in the table.

FIELD/FRAME	CAMERA GENLOCK	REC RATE
FIELD	ON	60FPS
	OFF	30FPS
FRAME 3DIM	ON	10FPS
ON	OFF	10FPS
FRAME 3DIM	ON	30FPS
OFF	OFF	15FPS

•“FPS” indicates as field per second or frame per second when the FIELD/FRAME parameter is set to FIELD or FRAME in the menu.

4.Move the cursor to the REC QUALITY parameter by pressing the D or C button, then select a recording image quality by pressing the + or - button.

SUPER FINE: For enhanced sharpness (Compression Rate 1/6)

FINE: For fine image quality (Compression Rate 1/10)

NORMAL: For normal image quality (Compression Rate 1/16)

EXTENDED: For extended recording quality (Compres- sion Rate 1/25)

The factory default setting is SUPER FINE.

5.Move the cursor to the PRE PICTURES parameter by pressing the D or C button, then select a number of the pre-recording image by pressing the + or - but- ton.

0:Disables pre-recording.

4 to maximum: Sets the number of images for pre- recording.

•The maximum number of the pre-recording is deter- mined by the setting of FIELD/FRAME and REC QUALI- TY.

The factory default setting is 15.

The value that appears underneath the number of pre- recording images indicates the number of images to be recorded per assigned group camera (number of pre- recording images divided by number of the assigned group cameras).

6.Move the cursor to the POST PICTURES parameter by pressing the D or C button, then select a number of the post-recording image by pressing the + or - but- ton.

4 to 200: Sets the number of images for post-recording.

The factory default setting is 60.

54