Panasonic WJ-HD500A r Warning Display, FORMAT ERROR or, t System Status Display, y Group Display

rWarning Display

Displays the status in case of Disk Recorder trouble.

THERMAL ✽: Indicates thermal error in the Disk Recorder or the extension units.

(✽ indicates the extension unit number)

HDD ✽✽%: Is displayed when the remaining space of the Hard Disk reaches a specified value.

(✽✽indicates the remaining capacity.)

DISK FULL: Is displayed when the remaining space of the Hard Disk reaches 0 %.

DVD ✽✽%: Indicates the remaining space of the DVD- RAM Disk. (✽✽ indicates the remaining capacity.)

ALTERED: Is displayed when the recorded data are altered.

ERROR ✽-✽:Indicates access error of the Hard Disk. (✽-✽indicates the Hard Disk number in the Disk Information menu)

ERROR: Indicates that the other errors have occurred. PWR LOSS: Is displayed when the UPS

(Uninterrupted Power Supply) detects a power failure.

WARNING ✽-✽:Indicates that the hard disk will become failure soon. Replace ones for system complement.

PROTECTED: Indicates that the DVD-RAM disk is not write enabled.

NO DISK: Indicates that the DVD-RAM disk is not inserted in the DVD Extension Unit.

FORMAT ERROR or

MEDIUM ERROR: Indicates that the DVD-RAM disk is not identified.

DVD BUSY: Indicates that the DVD Extension Unit is not ready or is being accessed.

tSystem Status Display

Displays the system status of the Disk Recorder.

5: Indicates that data are being played back.

5 X✽: Indicates that data are being played back with the search function.

(✽ indicates the search speed value)

y : Indicates that the playback is being paused.

COPYING: Indicates that data are being copied.

LOCKED: Indicates that the buttons are locked.

BUSY: Indicates that the line is busy.

yGroup Display

Displays the selected group (G1, G2, G3, G4).

When all groups are selected, the display is disabled.

uElectronic Zoom Display

Displays to indicate that the zooming mode is selected.

ZOOM X✽: Indicates that the electronic zoom mode is selected (✽ indicates a value)

iGroup Title Display

Displays the group title edited in the setup menu.

oCamera Title Display

Displays the camera title edited in the setup menu.

It can also enable the alarm display set in the setup menu when an alarm is activated.

ALARM: Receives an alarm from the ALARM port.

VMD: Detects a motion on the image

CH✽✽LOSS: Detects a video signal loss has occurred.

!0REMOTE

Indicates that the access from network is under way.

36