Panasonic WJ-HD500A manual Control Port Connection

■Control Port Connection

The CONTROL port can be used for controlling the system with the outboard device as shown below.

13 1

25 CONTROL 14

Pin	Designation	Pin	Designation
No.		No.
1	Group Recording Output	14	Disk Recorder Error
			Output
2	Manual Recording Output	15	Ground
3	Emergency Recording	16	Ground
	Output
4	Sequence Timing Output	17	Power Failure Detect Input

•Time adjustment can be enabled connecting with the external device as shown below.

WJ-HD500A

CONTROL Port

13			1
25	24	20	14

Time Adjustment Output

•The Extension Units are installed in the system for extending its disk capacity.

Connect each thermal error output from the Extension Units with the CONTROL Port on the rear of the WJ- HD500A Disk Recorder as shown below.

The WJ-HD500A will display the warning for thermal error on the monitor.

5	DVD Remain Space	18	Power Failure Proceeding
	Output		Output
6	HDD Remain Space	19	Power Failure Process
	Output		Completion Output
7	Thermal Error Input	20	Ground
	(Extension 1)
8	Thermal Error Input	21	Emergency Recording
	(Extension 2)		Input
9	Thermal Error Input	22	Time Adjustment Output
	(Extension 3)
10	Thermal Error Input	23	Daylight Savings Select
	(Extension 4)
11	Thermal Error Input	24	Time Adjustment Input
	(Extension 5)
12	Thermal Error Input	25	Ground
	(Extension 6)
13	Thermal Error Input (DVD
	Unit)

•Emergency Recording can be enabled receiving the input from the connected external device.

WJ-HD500A

CONTROL Port

13 1

WJ-HD500A

CONTROL Port

13 121110 9 8 7	1
25	14
20

Extension Unit #1

Thermal Error Out

G

Extension Unit #2

Thermal Error Out

G

Extension Unit #3

Thermal Error Out

G

Extension Unit #4

Thermal Error Out

G

Extension Unit #5

Thermal Error Out

G

Extension Unit #6

Thermal Error Out

G

25 21 20 14

Terminal board on		ERROR OUT
	G	THERMAL	NC
the Extension Unit

19