Panasonic WJ-HD500A manual Emergency Recording Backup, DVD Disk End Setup, Disk Space Display

■Emergency Recording Backup

This item lets you enable or disable automatic backup of Emergency Recording data.

1.Move the cursor to the AUTO COPY(EMERGENCY) parameter on the DVD menu by pressing the C or D button

2.Select either ON or OFF by pressing the + or - but- ton.

OFF: Disables emergency data backup.

ON: Enables emergency data backup.

The factory default setting is OFF.

Note: The following operations will be disabled by

AUTO COPY(EMERGENCY) ON. Formatting the DVD-RAM disk Displaying DVD-RAM disk recording list Playing back DVD-RAM disk recording

list

To enable the above functions, set the parameter to OFF.

■DVD Disk End Setup

This item lets you enable or disable uninterrupted storage when the DVD-RAM disk runs out of space.

1.Move the cursor to the DVD DISKEND parameter on the DVD menu by pressing the D or C button.

2.Select the desired mode by pressing the + or - but- ton.

STOP: Stops storage when the disk is full.

CONTINUE: Continues storage by overwriting the old- est data when the disk is full.

The factory default setting is STOP.

■Disk Space Display

This item lets you select status display mode on the multi- screen monitor when the remaining storage capacity is run- ning low on the DVD-RAM disk.

1.Move the cursor to the DVD FULL parameter on the DVD menu by pressing the C or D button.

2.Select the desired display mode by pressing the + or - button.

OFF: No warning for remaining space

1 - 10%: The selected warning is issued if the remain- ing storage capacity is between 1 and 10%.

The factory default setting is 1%.

Note: This setting is valid when the DVD DISKEND is set to STOP on the menu.

77