GE JGSP40 HOW does this Cooktop Compare To Your OLD ONE?, Sureace Cooking, Electric Ignition

HOW DOES THIS COOKTOP COMPARE

TO YOUR OLD ONE?

Your new cooktop has gas burners. If you are used to cooking with induction or other electric surface units, you will notice some differences when you use gas burners,

The best types of cookware to use, plus heat-up and cool-down times, depend upon the type of burner or surface unit you have.

The following chart will help you to understand the differences between gas burner cooktops and any other type of cooktop you may have used in the past.

Type of Cooktop	Description	How it Works
Gas Burners	I Rewlarorsealed	Flames heat the pans directly. Pan flatness is not critical to cooking results, but
(J	gas-burners use	pans should be well balanced. Gas burners heat the pan right away and change
	either LP gas	heat settings right away. When you turn the control off, cooking stops right away.
*	or natural gas.
Radiant	Electric coils	Heat travels to the glass surface and then to the cookware, so pans must be flat on
(Glass Ceramic)	under a glass-	the bottom for good cooking results. The glass cooktop stays hot enough to
Cooktop	ceramic cooktop.	continue cooking after it is turned off. Remove the pan from the surface unit if
o		you want cooking to stop.
Induction	High frequency	Pans must be made of ferrous metals (metal that attracts a magnet). Heat is
$g;f$	induction coils	produced by a magnetic circuit between the coil and the pan. Heats up right away
./, ,,,\.\,...	under a glass	and changes heat settings right away, like a gas cooktop. After turning the control
	surface.	off, the glass cooktop is hot from the heat of the pan, but cooking stops right away.
Electric Coil	Flattened metal	Heats by direct contact with the pan and by heating the air under the pan. For best
	tubing containing	cooking results, use good quality pans. Electric coils are more forgiving of
e	electric resistance	warped pans than radiant or solid disks. Heats up quickly but does not change
	wire suspended	heat settings as quickly as gas or induction. Electric coils stay hot enough to -
	over a drip pan.	continue cooking for a short time after they are turned off.
Solid Disk	Solid cast iron	Heats by direct contact with the pan, so pans must be flat on the bottom for good
@	disk sealed to the	cooking results. Heats up and cools down more slowly than electric coils. The
	cooktop surface.	disk stays hot enough to continue cooking after it is turned off. Remove the pan
0		from the solid disk if you want the cooking to stop.

SUREACE COOKING

Electric Ignition

Your surface burners are lighted by electric ignition, eliminating the need for standing pilot lights with constantly burning flames.

In case of a power failure, you can light the surface burners on your range with a match. Hold a lighted match to the burner, then turn the knob to the LITE position. Use extreme caution when lighting burners this way.

Surface burners in use when an electrical power failure occurs will continue to operate normally.

Surface Burner Controls

Knobs that turn the surface burners on and off are marked as to which burners they control. The two knobs on the left control the left front and left rear burners. The two knobs on the right control the right front and right rear burners.

10