Emerson Process Management 1420 manual Initial Connection for Configuration

Page 3

Quick Installation Guide

00825-0100-4420, Rev CA June 2007

1420 Wireless Gateway

STEP 1: INITIAL CONNECTION FOR CONFIGURATION

To configure the 1420 Wireless Gateway, a local connection between a PC/laptop and the 1420 Wireless Gateway must be established.

NOTE:

If a PC/laptop from another network is used, carefully record the current IP address and other settings so the PC/laptop can be returned to its original network when configuration of the 1420 is finished.

Perform the following steps to establish a local connection with the 1420 Wireless Gateway:

1.On the PC/laptop, install the Java Plug-in found on the CD provided with the 1420. The Plug-in can also be found at http://java.com/

2.Under Network Connections:

a.Select Local Area Connection

b.Right click to select Properties.

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Quick Installation Guide Wireless GatewayImportant Notice Initial Connection for Configuration + S S a B + S S + Wireless Gateway Wireless Gateway Basic Security and Time Configuration To configure the 1420 for an Ethernet Network Basic Ethernet or Serial ConfigurationTo configure the 1420 for a Serial connection Integral Antenna with the 1420 on a Mast Mount and ConnectSupply Power Connect to Information SystemTx + Tx + = a Rx + Rx = B Product Certifications Approved Manufacturing LocationsHazardous Location Certifications IECEx Certification European Certification+ S Xxxxxxx Wireless Gateway
Top Page Image Contents