Quick Installation Guide
1420 Wireless Gateway
c.Select Internet Protocol (TCP/IP), then click the Properties button
d.Select the Use the following IP address button and set the IP address to 192.168.1.12
e.Set the Subnet Mask to 255.255.255.0
f.Select OK for each of the settings windows that have opened.
3.Using the supplied crossover Ethernet cable, attach your PC/laptop to the 1420’s P1 Ethernet Receptacle (far right Ethernet receptacle).
PC/Laptop
P1 Ethernet
Receptacle
24 V DC |
|
|
|
Power Input | Modbus | Not Used | Not Used |
+ - S S A B + - S S - + |
Case
+ | - | S | S | - | + |
POE | P2 | P1 | Not Used | Not Used |
(Covered)
Crossover Cable
WARNING
Do not connect to the P3 Power Over Ethernet (POE) port. This port supplies power and could potentially damage the PC/laptop.
4