Ericsson EUB-9701 EXT2 user manual Ssid

Page 13

EUB-9701 Wireless N USB adapter

Version 1.3

Click on Launch Config Utilities. Notice it has many tabs for configuration

To make connection, select one AP/SSID (eg: NKSP) and click [Connect]. When the connection works, [Connected] will appear in the left button of this tab and the icon appears in front of the linked AP.

When the connection failed, [Disconnected] will appear. If the AP has set up the encryption, please setup the same before you click [OK].

Click on Site Survey tab. Press Rescan. You will see several AP listed under

SSID

They denote individual access points. Click on the one you want to connect with. Notice that if there is no security key needed, you can see that in the Encryption status as “None”.

13

Image 13
Contents EUB-9701 EXT2 Table of Contents Revision History Introduction FeaturesPackage Contents System Requirements InstallationEUB-9701 Wireless N USB adapter Version EUB-9701 Wireless N USB adapter Version Verify installation Setup Network Configuration MS WinXP Select the General tab Setup Wlan EnGenius Config-Utility Ssid Setting WEP Setup Network security WEP, WPA…Setting WPA WPA and WPA2 Setting the Authentication and Security Adding Profiles EUB-9701 Wireless N USB adapter Version WPS Configuration 12 QoS Advanced Settings EUB-9701 Wireless N USB adapter Version Statistics Link Status About Uninstalling EnGenius Utility/Driver Select Remove All EUB-9701 Wireless N USB adapter Version EUB-9701 Wireless N USB adapter Version Appendix a Driver Installation for Windows Vista EUB-9701 Wireless N USB adapter Version Click Install this driver software anyway Wait a moment Finish install driver. Click Close RF Information Appendix B SpecificationsFederal Communication Commission Interference Statement Industry Canada statement