Black Box MD885C-R2, MD885AE-R2, MD885A-R3, 34336 user manual Remote Test Enable Disable

Page 45

Modem 34336

3.3.5TEST OPTIONS

The Test Options affect certain tests (as explained below) but do not activate tests.

The DSR During Analog Loopback is available for all modes. When ON is selected, the Data Set Ready signal is forced on when the modem is in the analog loopback test mode. In general, this option should be left ON (the default selection).

The Remote Test option is available for all modes. The Remote Test option allows you to prevent tests from being initiated on the local Modem from a remote modem. If DISABLE is selected from the Remote Test screen, the local Modem ignores test initiation signals from a remote modem. If ENABLE is selected, tests can be initiated from a remote modem.

Note that there are two REMOTE TEST screens. One is for the option just described; the other is used for selecting either the remote digital loopback tests or remote front panel control. The Remote Test option screen (for preventing or allowing remote testing) looks like the one shown below.

REMOTE TEST

ENABLE DISABLE

1

2

3

 

 

 

3.3.6EIA OPTIONS

The seven options described below allow control over specific EIA interface signals.

The CTS to EIA options are available for all modes. Regardless of the setting selected for this option, Clear to Send (CTS) is off during flow control (which occurs if error correction and flow control or buffer mode are enabled).

NORMAL — The Clear to Send signal is on while the modem is on-line.

RTS — The CTS signal immediately follows the RTS signal with no delay.

TRUE — The CTS signal follows DTR.

CTS can also be set to be ON at all times regardless of DTR by using the Summary Setup feature. However, if CTS on/off is selected from DCE-DTE screen 1, V.42 flow control, while active, overrides the CTS ON selection. To set CTS ON, refer to Appendix C. Note that if you set CTS to ON using Summary Setup and then make a selection from the CTS to EIA screen, that selection cancels the Summary Setup CTS ON selection.

44

Image 45
Contents Modem FCC Information Table of Contents Table of Contents Diagnostics Table of Conents Specifications Specifications Quick Start InstallationFor all applications Quick StartFor leased-line applications For dialup applicationsFront-Panel LCD and Controls Front-Panel LCD and ControlsMR = TR =RS = CS =Quick Setup Dial Hayes Available Quick Setup ConfigurationsV25 Dial Async V25 Dial SyncQuick Setup 11 2-W Dial Quick Setup 12 2-W Dial V32/208 Quick Setup 07 2-W Leased ANSBasic Operation AT D 5551212 crAT D 9,5551212 cr AT DP Asynchronous V.25 bis Operation CRNSynchronous V.25 bis Operation Pushbutton 1 Phone Pushbutton 2 Prog ENT Auto-Dial Failure Messages9600 6 2-WIREDIAL Bell 208 Operation Quick Setups 11 34/V.32 Dial Backup Slave-to-Master Inbound Transmission Problem Solving This page is intentionally left blank Methods For Selecting Options Modem Setup OptionsSelecting Options from the Front-Panel Setup Type Line Speed For Modem SETUPS. The first Options Modem Resultant Data RATE, bps SETTING, bpsModem 1 V.42 Error Correction Options Modem Modem Setup Options Modem Modem Setup Options Dialer Mode Data Format Options Modem See Section Remote Test Enable Disable Modem Setup Options Modem Setups Compromise Equalizers option is available for all modes Modem 8 V.33 and Bell 208A/B Options Options Accessible with Summary Setup only Modem Setup Options Modem Modem Setup Options Phone Number Storage Quick ResetGeneral Operation and Special Features Leased Line Auto-RecoveryCharacter Function Dialing Control CharactersDial Backup Dial Line Auto-Recovery AT &Z0=T555-4545/R DTR DialingDumb Mode And Bell 208 Operation TR MR RS CS Modem Security Operation Command Function EXAMPLE1 MEM.LOC.2 Password CommandsAT &Z1=/ASECURITY AT &Z5=/PYELLOW AT &Z0=/UCONNECTED Modem-Controlled Remote ControlControl Procedure Modem-to-Modem Control Procedure Using a Rack Controller General Operation and Special Features Remote control-address control mode Pin Function Diagnostic Interface ControlCommand Function Diagnostic Port CommandsConnect 003,022 CON 000003,22 Connect 3,22Address g,u Response Meaning ErrorDTE display Automatic Fallback Mode Description V.22 bis/BELL 212A/BELL 103 Fallback DefaultV.22 bis/V.22/V.21/V.23 Fallback Rate Renegotiation Procedure RRPRate Change Screen How to Enable or Disable RRP11 V.13 Operation Hayes Mode Autodialer Hayes Emulation ModeAT DT 9,212555-1234 or AT DT 9, 212 555 AT M2 V1 D 555-1212 S2=1OAT DT 9,555-1212 Exclamation FlashHayes Compatible Commands AT D3331234 AT D 555-1212 L5 AT S7=30 AT D9,3331234 Hayes Emulation Mode Registers AT S0=5 AT S0? S7?Modem Hayes Emulation Mode Selecting Options In Hayes Mode Hayes Mode Reference Tables Hayes Compatible Commands Product Code Or Checksum Speaker VolumeSpeaker Control Forced On-LineRead S Register Modify S RegisterTone Dialing Word/Digit Result CodeRecall Factory Configuration Forced Command StateLong-Space Disconnect Recall Stored User ProfileAsynchronous/Synchronous Mode RTS And CTS OptionsData Set Ready Control View Active Configuration, etc Test CommandsDefault User Profile Write Profile To MemoryBuffer Mode/Speed Conversion Store Telephone Number\B1 MNP Class LimitHayes Compatible Commands Digit Code Word Code Meaning Hayes Mode Result Codes105 S Register Functions Register Range Units Default DescriptionEnabling The V.25 bis Autodialer V.25 bis AutodialerV.25 bis Autodialer Commands 109 CIC V.25 bis Autodialer CommandsV.25 bis Dialing Parameters C, D, #,Section Dialing Parameters DTR Dialing In V.25 bis ModeV.25 bis Result Codes V.25 bis Result CodesSymptoms and Scope of The Problem When And Why To TestPhysical Inspection Overview Of Modem DiagnosticsDiagnostic Monitoring Status Screens How to Select and Activate Tests116 117 Analog Loopback Test Local Modem Diagnostics119 Analog Loopback Self-Test Albst External Analog Loopback Test Albx 122 External Analog Loopback Self Test Albst 124 Digital Loopback Test DLB Remote Digital Loopback Test RDL Remote Modem Diagnostics127 Remote Digital Loopback Self Test Pin Desig Function Source Nation IndicatorTable B-1. Quick Setup Configurations Appendix B Quick Setup ConfigurationsDumb LEASED2 Table B-1 . Quick Setup Configurations132 133 134 Introduction to Summary Setup Appendix C Summary SetupFigure C-1. How to access the Summary-Setup Screens Primary Options Setups ScreenPrimary Options Dial Line Options0 2 1 1 0 0 0 0 0 1 0 2 V42 1 V42Pump1 Pump2 Data Pump OptionsMisc1 Misc2 Miscellaneous OptionsAT Profiles AT Profiles ScreenFigure C-3. Changing the S Register Value REG ScreenAppendix D Jumpers Appendix D Jumpers Table D-1. Jumper Switch Functions NOM Statement 148 Copyright 1999. Black Box Corporation. All rights reserved
Related manuals
Manual 3 pages 611 b

MD885C-R2, MD885A-R3, MD885AE-R2, 34336 specifications

Black Box 34336 is a versatile and powerful solution designed to meet the diverse needs of data communication and management in various environments. This device integrates advanced technologies that enhance connectivity, streaming capacity, and security, making it ideal for both corporate and personal use.

One of the primary features of the Black Box 34336 is its robust connectivity options. It supports multiple protocols, allowing seamless integration with different network systems, including Ethernet, Wi-Fi, and other wired options. This versatility ensures that users can rely on the device in various settings, from small offices to larger enterprise environments. With the ability to manage both wired and wireless connections, it provides the flexibility needed to create a comprehensive network infrastructure.

Another significant characteristic of the Black Box 34336 is its cutting-edge data encryption capabilities. Security is paramount in today's digital landscape, and this device employs advanced encryption techniques that protect sensitive information during transmission. Whether facilitating remote work or supporting in-house operations, the device ensures that data remains secure, reducing the risk of unauthorized access and breaches.

The device also features an intuitive user interface, making it easy to configure and manage settings. Users can quickly access different functionalities, including monitoring network performance, adjusting security protocols, and managing connected devices. The user-friendly design caters to both seasoned IT professionals and those less tech-savvy, promoting broader usability across organizational levels.

Performance is another critical area where the Black Box 34336 excels. It boasts high-speed data transfer rates, enabling efficient data handling for various applications. Whether it is video streaming, large file transfers, or real-time data analytics, users can expect minimal latency and reliable performance. This capability is particularly beneficial for businesses that require real-time data processing and communication.

In summary, the Black Box 34336 stands out as a reliable and feature-rich solution for anyone looking to enhance their networking capabilities. With its versatile connectivity options, robust security features, user-friendly interface, and high-performance data handling, it addresses a myriad of needs in the modern digital age. As technology continues to evolve, the Black Box 34336 proves to be a forward-thinking solution designed to adapt and thrive in an ever-changing landscape. Whether for personal use or within an organizational framework, this device offers a comprehensive approach to data communication and management.