Cavalier 6381 Setup Instructions for Windows XP, Network Connections window will open Fig

Page 6

Setup Instructions for Windows XP

1.Click your Start button, Run. In the run bar type NCPA.CPL. Click the OK button

2.A Network Connections window will open (Fig 1.1)

Right click on Local Area Connection, left click on

Properties

3.The Local Area Connection Properties window will open up (Fig 1.2)

Double click on Internet Protocol (TCP/IP)

4.The Internet Protocol (TCP/IP) Properties window will open (Fig 1.3)

Click on Use the following IP address

Enter your IP address from the welcome letter in the IP address box

Enter 255.255.255.0 in the Subnet mask box

Enter your default gateway from the welcome letter in the Default Gateway box

Click on Use the following DNS server addresses

Add the primary and secondary DNS numbers below based upon your state

VA & MD: 64.83.0.10

VA & MD: 64.83.1.10

PA: 209.137.171.10

PA: 209.137.171.20

DE: 209.137.160.7

DE: 209.137.160.3

5. Click the OK button

6. Click the OK button at the Local Area Connection Properties window

7.You should now be connected to the internet, open up Internet Explorer to surf the web

Figure 1.1

Figure 1.2

Figure 1.3

 

4

Image 6
Contents CavVelocity About Your DSL Service Your DSL ConnectionPackage Checklist DSL Modem Power SupplyInstalling the CavVelocity 6381 DSL Modem Steps for Telephone Service Setting up Your PC for DSLSettings Setup Instructions for Windows XP Network Connections window will open FigSetup Instructions for Windows Network and Dial-Up Connections window will open up FigClick on Use the following DNS server addresses Setup Instructions for Windows 98/ME Click on the DNS Configuration tab Fig Click on Enable DNSClick on Specify an IP address Setup Instructions for Macintosh OS X If you do not get a reply back from your default gateway Network TestTo check to see if you are connected to our network Your router, or contact the router manufacturer ProperlyISP Technical Help Desk