Setup Instructions for Windows 2000
1.Right click on My Network Places, click on Properties (Fig 2.1)
2.A Network and Dial-Up Connections window will open up (Fig 2.2)
■Right click on Local Area Connection, left click on Properties
3.A Local Area Connection Properties window will open up (Fig 2.3)
■Double click on Internet Protocol (TCP/IP).
4.The Internet Protocol (TCP/IP) Properties window will open (Fig 2.4)
■Click on Use the following IP address
■Enter your IP address from the welcome letter in the IP address box
■Enter 255.255.255.0 in the Subnet mask box
■Enter your default gateway from the welcome letter in the Default Gateway box
■Click on Use the following DNS server addresses
■Add the primary and secondary DNS numbers below based upon your state
•VA & MD: 64.83.0.10
•VA & MD: 64.83.1.10
•PA: 209.137.171.10
•PA: 209.137.171.20
•DE: 209.137.160.7
•DE: 209.137.160.3
5.Click the OK button
6.Click the OK button at the Local Area Connection Properties window
7.You should now be connected to the internet, open up Internet Explorer to surf the web.
Figure 2.2
Figure 2.1
Figure 2.3 | Figure 2.4 |
5