Corega user manual WLUSB2GO Manual

Page 23

WLUSB2GO Manual

Wireless mode: Select wireless network mode(speed)

-802.11b/g mixed: Automatically detect 11b or 11g

-802.11b only: Frequency only 11b

-802.11g only: Frequency only 11g

11b/g Protection: In order to keep the connection stable, please select [Auto] to automatically confirm which mode the wireless network is in.

TX Rate: Manually force the Transmit using selected rate. Please accept the default setting.

Tx-Burst: Ralink’s proprietary frame burst mode. When it is checked, transmit throughput will be improved.(Only work when AP support this function. eg: coreag WLBARGMO)

-Enable TCP Window Size: Extend the Window size of TCP.(When checked, the recieve speed will improve.)

-Fast Roaming at ___ dBm: It will enter romaing mode when dBm reaches a level.

CCX2.0: Open CCX(supports Cisco Compatible Extensions function). Check it when AP supports Cisco.

-LEAP turn on CCKM: Open CCKM fuction (Cisco Key Man- agement).

-Enable Radio Measurements:Open the function of CCK Monitor AP Channel.

-Non-Serving Channel Measurements... : Select and start to monitor if wireless channel is non-serving.

Radio Off: Disable wireless radio wave.

[Apply] : Click this when finish the settings.

22

Image 23
Contents 54M Wireless USB Adapter Contents Preface FeaturesPackage Content Hardware description Installation StepsHardware Installation Software InstallationUtility and Driver Installation Corega Wireless Adapter Setup Click Continue Anyway Verify the Hardware Status WLUSB2GO Manual Setting TCP/IP Setting Wireless Network WLUSB2GO Manual Setting WEP Network Security SettingPlease follow the instructions 《WPA-PSK and WPA2-PSK》 Setting WPA《WPA and WPA2》 Click OK to finish setting Site Survey Utility introductionAdd one profile Profile This tab displays the information of the link status Link StatusStatistics Advanced settingsWLUSB2GO Manual About IP InformationFAQ WLUSB2GO Manual WLUSB2GO Manual DS-SS, Ofdm SecificationAbout corega Corega Taiwan Inc