Cisco Systems DPQ2202 important safety instructions Rev a

Page 23

How Do I Connect the Cable Modem for Internet and Telephone Service?

Important: When using a USB connection, you need to install USB drivers on your PC. For assistance, go to Installing USB Drivers (on page 24).

Note: You can connect two separate PCs to the cable modem at the same time by connecting one PC to the ETHERNET port and one PC to the USB port. However, do not connect your PC to both the ETHERNET and USB ports at the same time.

5Connect one end of a telephone jumper cable (not included) to a telephone outlet in your home or to a telephone or fax machine. Then connect the other end of the jumper cable to the appropriate RJ-11 TELEPHONE port on the back of the cable modem. The telephone ports are light gray and are labeled 1/2 and 2 or 1 and 2 depending on the region of the world the cable modem is used.

Notes:

–Make sure to connect your telephone service to the correct RJ-11 port. For single line telephone service, connect to port 1/2 or 1.

–In North America, cable modems have multi-line capability on the RJ-11 telephone port labeled 1/2. Line 1 is on pins 3 and 4 of port 1/2, and Line 2 is supported on pins 2 and 5. In Europe, cable modems support only one line per port. Line 1 is on port 1 and line 2 is on port 2.

–Telephones that require electrical connectors other than RJ-11 may require an external adapter (sold separately).

6Locate the AC power cord provided with your cable modem. Insert one end of the power cord into the AC connector on the back of the cable modem. Then, plug the AC power cord into an AC outlet to power-up the cable modem. The cable modem will perform an automatic search to locate and sign on to the broadband data network. This process may take up to 2-5 minutes. The modem will be ready for use when the POWER, DS, US and ONLINE LEDs on the front panel of the cable modem stop blinking and remain on continuously.

7Plug in and power on your PC and other home network devices. The LINK LED on the cable modem corresponding to the connected devices should be on or blinking.

8Once the cable modem is online, most Internet devices will have immediate Internet access.

Note: If your PC does not have Internet access, refer to Frequently Asked Questions (on page 29) for information on how to configure your PC for TCP/IP. For Internet devices other than PCs, refer to the DHCP or IP Address configuration section of the User Guide or Operations Manual for those devices.

4028520 Rev A

23

Page 22 Page 24
Image 23
Page 22 Page 24
Contents This Document Cisco Model DPQ2202 VoIP Cable Modem User GuideImportant Safety Instructions Aviso a los instaladores de sistemas Catv Mitteilung für CATV-TechnikerGround the Product Power Source WarningHandling Disposable Batteries Verify the Power Source from the On/Off Power LightProtect the Product from Lightning Provide Ventilation and Select a Location Protect the Product When Moving ItCanada EMI Regulation Declaration of ConformityIntroduction Benefits and FeaturesIntroduction Whats In the Carton? Front Panel Description Battery Illuminates when the battery is fully charged Back Panel Description System Requirements for an Ethernet Connection What Are the System Requirements for Internet Service?Minimum System Requirements for a PC Minimum System Requirements for MacintoshAlready Have an Existing High-Speed Internet Access Account Do Not Have a High-Speed Internet Access AccountWant to Use the Cable Modem for Telephone Service Where Is the Best Location for My Cable Modem? Before You Begin How Do I Mount the Modem on a Wall? OptionalLocation and Dimensions of the Wall-Mounting Slots Telephone Device Types What Are the Requirements for Telephone Service?Telephone Wiring Requirements Number of Telephone DevicesTo connect devices Connecting and Installing Internet DevicesPort on the back of the cable modem Rev a Installing USB Drivers on Windows 2000 Systems Installing USB DriversInstalling USB Drivers on Windows Vista Systems Installing USB Drivers on Windows XP SystemsReplacing the Battery How Do I Maintain the Battery Optional Model OnlyCharging the Battery Using the Modem Without a BatteryRemoving and Replacing the Battery Location of the Battery Optional Model OnlyHow Do I Maintain the Battery Optional Model Only How do I arrange for cable telephony installation? Frequently Asked QuestionsHow many telephones can I connect? Frequently Asked Questions Having Difficulty? Common Troubleshooting IssuesCheck and Correct Tips for Improved PerformanceBattery Front Panel LED Status Indicator FunctionsFront Panel LED Status Indicators During Normal Operations Normal Operations AC Power appliedSoftware and Firmware Use Notice TrademarksDisclaimer Documentation Copyright NoticeIf You Have Questions For Information
Top Page Image Contents