Corega WLCBGMO user manual Setting Wireless Network

Page 12

Setting Wireless Network

WLCBGMO4 Manual

User can use corega Wireless Utility to configure wireless net- work. After finishing configuration, please check if the connec- tion works.

Please confirm that user’s computer is in the wireless radio wave range. If the computer is out of the radio range, the setup will not be seccessful.

After user installed CG-WLCBGMO and corega Wireless Utility, CG-WLCBGMO will automatically link with the AP/Router. If the connection is successful, the following message will appear .

1.Click the icon in the system tray to open the Utility. If there is no such icon, enter [Start]->click[Program]->select[CG- WLCBGMO]->click[corega Wireless Utility] and the icon will appear.

2.The availibale APs are displayed in the [Site Survey] tab. If there is no AP in dialog box, please press [Rescan] .

10

Image 12
Contents Miso Wireless Cardbus Adapter Page Contents Features Package ContentPreface Installation Steps Hardware descriptionSoftware Installation Hardware InstallationUtility and Driver Installation Corega Wireless Adapter Setup Click Continue Anyway Verify the Hardware Status Select and double-click CG-WLCBGMO Setting TCP/IP Setting Wireless Network Wlcbgmo Manual Network Security Setting Setting WEPPlease follow the instructions Setting WPA 《WPA-PSK and WPA2-PSK》《WPA and WPA2》 Click OK to finish setting Utility introduction Site SurveyAdd one profile Profile Link Status This tab displays the information of the link statusAdvanced settings StatisticsWlcbgmo Manual IP Information AboutFAQ Wlcbgmo Manual Wlcbgmo Manual Secification DS-SS, Ofdm