Corega WLCBGMO user manual Link Status, This tab displays the information of the link status

Page 22

WLCBGMO Manual

6.3 Link Status

This tab displays the information of the link status.

•Status: Displays the linked AP name and Mac address. When [Disconnect] appears in this box, the connection is failed.

•Extra Info: link status and strength.

•Channel:Current channel in use.

•Link Speed: Show current transmit rate and receive rate.

•Throughout: Display transmits and receive throughput value.

•Link Quality: Display connection quality based on signal strength and TX/RX packet error rate.

•Signal Strength: Receive signal strength, user can choose to display as percentage or dBm format

•Noise Level: Display noise signal strength.

20

Image 22

Contents Miso Wireless Cardbus Adapter Page Contents Package Content FeaturesPreface Installation Steps Hardware descriptionSoftware Installation Hardware InstallationUtility and Driver Installation Corega Wireless Adapter Setup Click Continue Anyway Verify the Hardware Status Select and double-click CG-WLCBGMO Setting TCP/IP Setting Wireless Network Wlcbgmo Manual Network Security Setting Setting WEPPlease follow the instructions Setting WPA 《WPA-PSK and WPA2-PSK》《WPA and WPA2》 Click OK to ﬁnish setting Utility introduction Site SurveyAdd one profile Proﬁle Link Status This tab displays the information of the link statusAdvanced settings StatisticsWlcbgmo Manual IP Information AboutFAQ Wlcbgmo Manual Wlcbgmo Manual Secification DS-SS, Ofdm