Corega WLCBGMO user manual Profile

Page 21

WLCBGMO Manual

mend you to select [Infrastructure].

Transmit power: the amount of power used by a radio trans- ceiver to send the signal out. User can choose power value by sliding the bar.

[RTS Threshold] and [Fragment Threshold] : We recommend you to use the default value. User can adjust threshold num- bers by sliding the bars or key in the values directly.

3.Click [OK] and the setted AP will appear in the [Profile] tab.

6.2 Profile

[Add]: Click [Add] to add a new profile.

[Delete]: to delete a profile, select one profile name and click [Delete].

[Edit]:to edit the setting of a profile, select the profile and click [Edit].

[Activate]: to activate the selected profile, select the profile and click [Activate].

19

Image 21
Contents Miso Wireless Cardbus Adapter Page Contents Features Package ContentPreface Hardware description Installation StepsHardware Installation Software InstallationUtility and Driver Installation Corega Wireless Adapter Setup Click Continue Anyway Verify the Hardware Status Select and double-click CG-WLCBGMO Setting TCP/IP Setting Wireless Network Wlcbgmo Manual Setting WEP Network Security SettingPlease follow the instructions 《WPA-PSK and WPA2-PSK》 Setting WPA《WPA and WPA2》 Click OK to finish setting Site Survey Utility introductionAdd one profile Profile This tab displays the information of the link status Link StatusStatistics Advanced settingsWlcbgmo Manual About IP InformationFAQ Wlcbgmo Manual Wlcbgmo Manual DS-SS, Ofdm Secification