Hardware Installation
Installation Procedures
!! WARNING !!
Discharge static electricity by touching the GROUND such as metal part of your case connected with good power ground before you handle the electronic circuit boards.
The manufacturer assumes no liability for any damage, caused directly or indirectly, by improper installation of any components by unauthorized service personnel. If you do not feel comfortable performing the installation, consult with a qualified computer technician.
Steps:
1.Turn OFF all powers on your system, including any peripherals (printer, external drives, modem, etc.).
2.Disconnect the power cord and the monitor cable from the back of the computer.
3.Unfasten the cover mounting screws on your system and remove the system cover. Refer to your system user manual for instructions to determine the location of the mounting screws.
4.Remove the retaining screw that holds the slot cover in place. Slide the slot cover out and put the screw aside (you will need it to secure the adapter).
5.To install the adapter in AGP expansion slot, carefully line up the
6.Replace the computer cover. Secure the cover with the mounting screws you removed in Step 3.
16