Jaton 5200 user manual Upgrade Steps

You have now completed the installation of your new graphics adapter on your system.

Upgrade Steps:

Add or change your video adapter to an existing system, you may precede a few steps before you install the new hardware and software (video display driver). The followings are some of the considerations:

1.To change a new adapter, please remove the existing video driver, or replace it to SVGA driver from Windows®98/Me system before you remove the existing hardware.

2.To add a new adapter, ensure the mainboard that has available IRQ for new devices, and there is no conflict between the others.

3.If you try add this video adapter to an ALL-IN-ONE mainboard (which video port built-in already), then you have to disable that port first. Otherwise, that will be a problem for the new video adapter setup.

4.The driver installation for system upgrade as same as below, if error occur when you proceed step 1, 2 or 3, please consult with your system dealer or the existing hardware manufacturer support.

17