Software upgrade
How to upgrade the software
1)Burn the data onto a blank
A.Procedure for software upgrade:
1)Power on the set and insert the prepared Upgrade CDR.
2)The set will starts reading disc & response with the following display TV screen:
Loading
Firmware Upgrade Erase and program.
OK |
| Cancel |
Select OK to start upgrade.
3)Press <OK> button to confirm, then screen will display :
Firmware Upgrade Programming, Please Wait...
Do not Switch the Player Off !
4)The upgraded disc will automatically out when files coping complete, then take out the disc.
5)About 1 minute later, the tray will automatically close when upgrading complete.
B. Read out the Firmware version to confirm the
upgrading
1)Power on the set and Open the tray door.
2)Press <9><6><6>button to check the software information.
The software version and other information are display on the TV screen as follows:
BE Version: DVP33XX_XX.XX
FE Version: XXXX.XXXXXX
DSP Version: DSP.XX
Region Code: X
Caution: The set must not be power off during upgrading, Otherwise the Main board will be damaged entirely.
Region Code Change
1)Power on the set and open the tray door;
2)Press "9" "8" "7" "9" and press the region code number
Notes:restart after above steps.
