IRIS DC1100E manual Limited Warranty

Page 8

ROM or floppy disk), down loaded from CNI or delivered through customer support. Any such additional software shall be considered "Soft-ware" for all purposes under this License.

5.Export Law Assurances. You acknowledge that the Software may be subject to export control laws and regulations of the U.S.A. You confirm that you will not export or re-export the Software to any countries that are subject to export restrictions.

6.No Other Rights Granted. Other than the limited license expressly granted herein, no license, whether express or implied, or otherwise, is granted to any copyright, patent, trademark, trade secret, or other proprietary rights of CNI

7.Termination. Without limiting Coaxial other rights, CNI may terminate this license if you fail to comply with any of these provisions. Upon termination, you must destroy the Software and all copies thereof.

Limited Warranty

The following limited warranties provided by CNI extend to the original end user of the Hardware/licensee of the Software and are not assignable or transferable to any subsequent purchaser/licensee.

1.Hardware. CNI warrants that the Hardware will be free from defects in materials and workmanship and will per-form substantially in compliance with the user documentation relating to the Hardware for a period of one year from the date the original end user received the Hardware.

2.Software. CNI warrants that the Software will perform substantially in compliance with the end user documentation provided with the Hardware and Software for a period of ninety days from the date the original end user received the Hardware and Software. The end user is responsible for the selection of hardware and software used in the end user's systems. Given the wide range of third-party hardware and applications, CNI does not warrant the compatibility or uninterrupted or error free operation of our Software with the end user's system.

3.Exclusive Remedy. Your exclusive remedy and Coaxial exclusive obligation for breach of this limited warranty is, in Coaxial sole option, either (a) a refund of the purchase price paid for the Hardware/Software or (b) repair or replacement of the Hardware/Software with new or remanufactured products. Any replacement Hardware or Software will be warranted for the remainder of the original warranty period or thirty (30) days, which ever is longer.

4.Warranty Procedures. If a problem develops during the limited warranty period, the end user shall follow the procedure outlined below:

A.Prior to returning a product under this warranty, the end user must first call CNI, or send an email to CNI at support@coaxialnetworks.com to obtain a return materials authorization (RMA) number. RMAs are issued between 8:00 a.m. and 5:00 p.m. Pacific Time, excluding weekends and holidays. The end user must provide the serial number(s) of the products in order to obtain an RMA.

B.After receiving an RMA, the end user shall ship the product, including power supplies and cable, where applicable, freight or postage prepaid and insured, to CNI. Within five (5) days notice from CNI, the end user shall provide CNI with any missing items or, at CNI’s sole option, CNI will either

(a) replace missing items and charge the end user or (b) return the product to the end user freight collect. The end user shall include a return address, daytime phone number and/or fax. The RMA number must be clearly marked on the outside of the package.

Coaxial Networks, Inc.

Page 8 of 60

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Iris DC1100-UG RevisionThis page intentionally left blank Table of contents Coaxial Networks, Inc Table of Figures This page intentionally left blank Copyright 2001-2005, Coaxial Networks, Inc Software LicenseLimited Warranty General Provisions Coaxial Networks, Inc Introduction Key BenefitsInstallation Requirements Package ContentsIris Rear Panel Connections Iris Rear PanelIris Front Panel Mounting the Iris UnitMounting Flat on Wall Attaching mounting braces for flat wall mountCoaxial Networks, Inc Setup Connecting Your Iris DC1100Configuring Your IRISDC1100 Checking Conditions Prior to System StartupCoaxial Cable Specifications Cable Network Diagram ConnectionsIris Connections with Integrated Upconverter Iris Connections with an external UpconverterIris Uplink Connection Connections with an external UpconverterLogging into Iris ConfigurationConfiguring Iris Connecting using Web Interface Web LoginConfiguring TCP/IP parameters Iris ConfigurationConfiguring Iris in Router mode Save and rebootConfiguring Iris in Bridge mode Network SetupBridge mode setup Bridge Mode Configuration Configuring Downstream RF Settings Downstream RF SettingsConfiguring Upstream RF Settings Upstream RF SettingsCreating Class of Service Profiles Class of Service CreationCoaxial Networks, Inc Adding Cable Modems Controlling Cable Modem AccessEnabling conditional access Saving Cable Modems List Cable Modem SubscriptionCoaxial Networks, Inc Iris CLI interface using Telnet Connecting from the cable interfaceConnecting from serial console Telnet to IrisHelp command LoggingPreg or preg verbose command Psid commandCount command Pcpe commandConfigcm command Rcount command Ver commandReboot command Shutdown commandUpcon command Coaxial Networks, Inc This page intentionally left blank Application Notes Network traffic between cable clientsAllowing PPPoE traffic across Iris Static IP MappingAssigning a reserved IP address to the CPE Assigning additional IP addresses to the uplink InterfaceChannel Frequency Chart Ntsc Channel Frequency Chart in MHz DocsisCoaxial Networks, Inc Coaxial Networks, Inc Coaxial Networks, Inc PAL Frequency Allocation EuroDOCSIS Channel Center Frequencies for Selected PAL SystemsChannel Center Frequencies for System G Hyperband Coaxial Networks, Inc Channel Center Frequencies for System G and D Regulatory Compliance Agency StandardsSpecifications Ietf MibsInsert/Overtype Mode Command Mode Entering Insert ModeVI Visual Editor EnteringCoaxial Networks, Inc Miscellaneous Ex Commands Ex syntax Some commands areVi environment variables File Saving and LoadingExamples

DC1100, DC1100E specifications

The IRIS DC1100E and DC1100 are advanced document scanning solutions designed to streamline the digitization process within various business environments. Recognized for their efficiency and robust functionality, these devices cater to the growing need for effective document management.

One of the primary features of the IRIS DC1100E and DC1100 is their high-resolution scanning capability, which ensures that documents are captured with exceptional clarity. The ability to scan in color, grayscale, and black and white at resolutions up to 600 dpi allows users to preserve the original quality of the documents, making them suitable for archiving or sharing digitally.

Equipped with an Automatic Document Feeder (ADF), the IRIS DC1100E and DC1100 can handle multiple pages in a single operation, enhancing productivity for businesses that deal with bulk documents. The ADF typically accommodates up to 50 sheets, significantly reducing the time and effort required for scanning larger volumes of paper.

Another standout characteristic is the advanced image processing technology included in these scanners. This technology optimizes scanned images by automatically cropping, rotating, and enhancing the clarity of text and images. Features such as automatic color detection help users achieve better results without the need for manual adjustments.

In terms of connectivity, the IRIS DC1100E and DC1100 offer versatile options to integrate seamlessly into existing office systems. The ability to connect via USB allows for a straightforward setup, while compatibility with various operating systems ensures that users can easily operate the device regardless of their preferred software environment.

Furthermore, these scanners support a wide range of file formats, offering flexibility when it comes to saving and sharing scanned documents. Users can save files as PDFs, JPEGs, and more, facilitating ease of access and organization.

User-friendly software accompanies the IRIS DC1100E and DC1100, providing features for document management, including OCR (Optical Character Recognition) capabilities. This functionality enables users to convert scanned documents into editable and searchable text, enhancing the efficiency of information retrieval.

In summary, the IRIS DC1100E and DC1100 are powerful scanning solutions well-suited for businesses looking to enhance their document management processes. With features such as high-resolution scanning, an efficient ADF, advanced image processing, versatile connectivity, and comprehensive software support, these devices represent a significant advancement in document digitization technology.
Top Page Image Contents