SBC comm 52609x02 manual Appendix B

Page 25

APPENDIX B

I want to uninstall/reinstall the Kingston® Adapter. What do I do?

Uninstalling (and reinstalling) the Kingston® Adapter in Windows® 95/98

1.Select Start -> Settings -> Control Panel. Double-click the System icon and choose the Device Manager tab.

2.Open the Network Adapters section (click the Plus sign).

3.If you don’t see the device under Network Adapters, look for a “PCI Ethernet Controller” in Other Devices. See picture below.

4.Highlight the PCI Ethernet Controller, or Kingston® KNE-PC2 (laptop), or KNE110, or KNE111 (desktop) adapter and click Remove.

•If you don’t see Kingston® at all in the Device Manager, the card is probably not seated correctly. Follow the steps below.

5.Shut down the desktop or laptop. Turn OFF and unplug the computer and any peripheral devices.

Installation Guide for Customer Self-Install: Efficient Networks® 5260, Windows 95/98/Me/2000

Page 24

©2001 SBC Advanced Solutions, Inc. All rights reserved.

 

Page 24 Page 26
Image 25
Page 24 Page 26
Contents Read ME First Table of Contents Verify Your System Requirements and Documents Verify the Contents of Your DSL Equipment Kit Install a Telephone Filter on Every Telephone Line To the DSL modem to be installed Step Other phones Answering machines Caller ID boxes Other filters you may encounter in your DSL Equipment Kit Choose Your Modem and Minimum Requirements Check Page Page Page Page Installing the Kingston Hardware Installing the Kingston Ethernet Adapter PCI Slot Remove PCI slot Cover Laptop Systems- Installing the Kingston Ethernet Adapter Install the Efficient Networks DSL Modem Page Finish Configuring Your System Create a Connection Profile 1Setup a New Profile in EnterNetEnterNet Icon Appendices Appendix a Appendix B Page Appendix C
Top Page Image Contents