Information pertaining to OEM customers
The AirCard 402 device has been granted modular approval for mobile applications. Integrators may use the AirCard 402 device in their final products without additional FCC/ IC certification if they meet the following conditions. Otherwise, additional FCC/IC approvals must be obtained.
1.At least 20 cm separation distance between the antenna and the user’s body must be maintained at all times.
2.To comply with FCC/IC regulations limiting both maximum RF output power and human exposure to RF radiation, the maximum antenna gain must not exceed 2.0 dBi in the Cellular band and 2.96 dBi in the PCS band.
3.The AirCard 402 device and its antenna must not be colocated with any other transmitter or antenna within a host device.
4.A label must be affixed to the outside of the end product into which the AirCard 402 device is embedded, with a statement similar to the following:
This device contains FCC ID: N7NAC402.
This equipment contains equipment certified under IC:
5.A user manual with the end product must clearly indicate the operating requirements and conditions that must be observed to ensure compliance with current FCC/IC RF exposure guidelines.
6.The end product with an embedded AirCard 402 device must pass the unintentional emission testing and properly authorized per FCC Part 15 requirements.
Note
If this device is intended for use in a portable device, you are responsible for separate approval to satisfy the SAR requirements of FCC Part 2.1093 and IC