Apple U10C011 manual Connectors on the Back of the Modem

Page 30

Connectors on the Back of the Modem

This list of connectors describes where to connect the cables and power adapter when installing the cable modem.

1.power: This is where you plug the included power adapter. Remember to use only the power adapter that came with the cable modem.

2.usb: This is where you plug the included USB cable. The other end connects to the USB port on your PC. It is not required when using the ethernet port.

3.enet: This is where you plug the included ethernet cable. The other end connects to the ethernet port on the PC or NIC. It is not requires when using the USB.

4.cable: This is where you connect the coaxial cable (not included) that leads to the cable splitter (not included) or the cable wall outlet.

User’s Guide

30

Image 30
Contents Data Cable Modem Contents Understand the Cable Modem’s Features Contact Your Local Cable OperatorSupplied Prepare Your Area for Cable Modem InstallationGather Supplied and Required Items Not SuppliedInstalling the Cable Modem Using the USB Port Installing the Software Drivers Before Hardware ConnectionPage Installing the Hardware Installing the Software Drivers Page User’s Guide Page Page User’s Guide Page Click Yes to restart the computer User’s Guide Page Page Page Page Page Click Finish to complete the installation User’s Guide Troubleshooting the USB Installation None of the LEDs is on when I power on the LAN Cable ModemSelect USB Composite Device and click Remove Click Refresh Uninstalling the USB Driver Installing the Modem Using the Ethernet Port Troubleshooting the Ethernet Installation None of the LEDs are on when I power on the Cable ModemPage Cable Modem LEDs and Connectors LEDs on the Front of the ModemLEDs indications Connectors on the Back of the Modem