Apple U10C011 manual Installing the Software Drivers

Page 8

outlet or surge protector.

5. You are now ready to install the software drivers.

Installing the Software Drivers

This section explains how to install the software drivers that your PC requires for the cable modem to operate.

Installing the Software Drivers in Windows 98 SE Operating System

CAUTION: You must install the drivers located on the CD that ships with your cable modem. If you use the default Windows-supplied software drivers, you will not be able to properly install the cable modem.

To install the cable modem software drivers using the Windows 98 operating system:

1.Power on your PC. After your computer boots, Windows detects the cable modem. The Found New Hardware screen appears, followed by the Add New Hardware Wizard screen.

2.Insert the CD into the PC’s CD-ROM drive and click Next. You will see the following screen.

User’s Guide

8

Image 8

Contents Data Cable Modem Contents Understand the Cable Modem’s Features Contact Your Local Cable OperatorPrepare Your Area for Cable Modem Installation Gather Supplied and Required ItemsSupplied Not SuppliedInstalling the Cable Modem Using the USB Port Installing the Software Drivers Before Hardware ConnectionPage Installing the Hardware Installing the Software Drivers Page User’s Guide Page Page User’s Guide Page Click Yes to restart the computer User’s Guide Page Page Page Page Page Click Finish to complete the installation User’s Guide Troubleshooting the USB Installation None of the LEDs is on when I power on the LAN Cable ModemSelect USB Composite Device and click Remove Click Refresh Uninstalling the USB Driver Installing the Modem Using the Ethernet Port Troubleshooting the Ethernet Installation None of the LEDs are on when I power on the Cable ModemPage Cable Modem LEDs and Connectors LEDs on the Front of the ModemLEDs indications Connectors on the Back of the Modem