KEY Features and Controls, Control Panel, Maximum

ENGLISH

Model 300C/500C

KEY FEATURES AND CONTROLS

	A. Control Panel (see below)			E. See Safety Instructions
F.	B. Shredder Drawer			(inside drawer)
	C. Casters			F. Bin Door

	D. Disconnect Power Switch			G. Bin (inside)
	1.		OFF
G.		2.	ON

CONTROL PANEL

1.	Overheat (red)	5.	Time Delay (blue)
2.	Remove Paper (red)	6.	Smart LockTM (blue)
3.	Bin Full (red)	7.	Start (blue)
4.	Drawer/Bin Door	8.	On/Off (blue)
	Open (red)

500C

1. 2. 3. 4.

*300C does not include time delay feature.

CAPABILITIES

WILL SHRED

SHREDDING MIXED MEDIA

8-1/2“ x 11” paper	8-1/2“ x 14” paper	Staples
	(200 sheets)

Paper clips	Credit cards	CD/DVD

Junk mail

Crumpled paper

Messy stack of paper

20+ Sheets Stapled – Pull apart stapled stacks of paper containing more than 20 sheets

Materials smaller than 8.5” x 11”, interlace small sheets, mailers and credit cards in between standard sheets

20+ Sheets Clipped – Pull apart clipped stacks of paper containing more than 20 sheets

An occasional CD or DVD is acceptable. Interlace the CD or DVD within a standard paper stack

Will not shred: Adhesive labels, continuous form paper, bound documents, transparencies, newspaper, cardboard, binder clips, industrial staples, more than 20 pages stapled or paper clipped together, laminates, 3½ in. Floppies, file folders, X-rays or plastic other than noted above

Paper shred size:
Cross-Cut	5/32 in. x 1-1/2 in. (4mm x 38mm)

Maximum:
500C Paper Capacity (8.5 in. x11 in. paper)	500*
300C Paper Capacity (8.5 in. x11 in. paper)	300*

*8.5 in. x11 in., 20lb., (75g) paper at 120V, 60 Hz, 9.5Amps; heavier paper, humidity or other than rated voltage may reduce capacity.