Fellowes 120C-2, 120-2 manual Set-Up, Operation, Control Switches, Troubleshooting Lights, To shred

English

Set-Up

•Turn retractable feet (D) to outward position. This will improve stability. The feet should be turned outward if shredder will not be placed between furniture.

•Pull waste basket drawer (A) completely out of cabinet.

•Put waste bag in basket (sample bags provided). Allow edges to overhang. Contact Fellowes to order more bags. (Part #36054).

•Slide waste basket drawer (A) into cabinet. The shredder will not operate if drawer is not pushed all the way into cabinet.

•Plug power cord into a convenient outlet.

Operation

Control Switches

	E		Control Switch (E)
		F	I	AUTOMATIC
				Turns on the automatic-start
				sensor and the green Ready
				light.
			O	OFF
				Turns off the automatic-start
H		G		sensor and the green Ready
				light.
	I	J	R	REVERSE
				Runs shredder in reverse mode.

Press and hold to activate.

Manual Forward Button (G) Runs shredder when button is held down.

Troubleshooting Lights

Ready Light (F)	Basket Ajar (H)	Basket Full (I)	Paper Jam (J)
(Green)
Shredder is in automat-	Waste basket drawer is	Waste basket is full or	Shredder is jammed
ic start mode.	open.	paper has collected	(e.g., too much paper
		under cutting cylinders.	fed at one time).

For convenience and energy savings, your shredder is equipped with an automatic- start sensor (K). This means that when the control switch (E) is in the automatic [I] posi- tion, the shredder will start running when you put paper into it and stop a few seconds after the paper has passed through.

CAUTION: The automatic-start sensor cannot tell the difference between paper and other objects. This feature can also be a hazard. Always turn off the shredder when it is not in use. Unplug the shredder if it will not be used for an extended period.

To shred

•Press control switch (E) to automatic [I] position. Green ready light (F) should turn on.

•Feed paper straight into entry (C), releasing when shredder begins shredding; see Product Profile for limits on paper width, shreddable items, sheet capacity, etc.

4