Kramer Electronics VP-720xl PIP Source Appearance Availability2, Activating the PIP Feature

Presentation Switcher / Scaler Buttons

When selecting one PIP source, your Presentation Switcher / Scaler automatically recognizes and displays the selected graphic PIP source on all the video displays1 and the selected video source on all the graphic1 displays, compliant to Table 4.

Table 4: PIP Source Appearance Availability2

The selected PIP		AV1, AV2, YC1, YC2, or component	Component (graphics), DVI, VGA1, or
source:		(video)	VGA2
Appears on:		Component (graphics), DVI, VGA1, and	AV1, AV2, YC1, YC2, and component
		VGA2	(video)
Does not appear on	:	AV1, AV2, YC1, YC2, and component	Component (graphics), DVI, VGA1, and
		(video)	VGA2

7.2.2Activating the PIP Feature

After setting the PIP source you can activate the PIP by:

￿￿Pressing the PIP button

￿￿Pressing the PIP key on the infra-red remote control transmitter (see section 7￿ .4, Figure 16)

￿￿Switching on the PIP functionality via the OSD Menu (see section 8￿ .5.4, Figure 35)

7.2.3The PIP Source (Orange) Frame

Whether the PIP source is enclosed by an orange frame or not, determines the functionality of the operation buttons (on the machine and remote control transmitter). For example, when the Source Prompt is ON, and the PIP Frame is ON, you can instantly position the PIP using the preset position control keys3.

When pressing the PIP button while the PIP Frame is ON (see section 8￿ .5.4):

￿￿The PIP appears enclosed in an orange frame

￿￿After a few seconds4 the orange frame disappears

￿￿When pressing the PIP button once again, the orange frame reappears

When pressing the PIP button while the PIP Frame is OFF (see section 8￿ .5.4), the PIP source toggles between PIP and no PIP, with no orange frame.

1 Even if the input signal is not connected. In this case the PIP appears over a blank screen

2 Since the component input is compatible with both video and graphic sources, the type of component source (video or graphic) determines where it is positioned in the table

3 On the infra-red remote control transmitter to instantly move the position of the PIP window to up to nine preset fixed locations (see Figure 16). For example, to move to the lower right corner of the image, press the button

4 By default, 20 seconds. But you can reset the timeout (from 3 to 60 seconds), see section 8￿ .5.6

18 KRAMER: SIMPLE CREATIVE TECHNOLOGY