Kramer Electronics VP-723xl, VP-724xl, VP-720xl, VP-719xl user manual User Define Measure Features

Configuring the VP-724xl via the OSD MENU Screens

Table 19 describes the User Define Measure features.

Table 19: User Define Measure Features

	User Mode Setting Definitions
H Total	Horizontal Total
H Start	Horizontal active start point
H Active	Horizontal active region
V Start	Vertical active start point
V Active	Vertical active region
Ch. Pump	Charge pump current
Color	Color format
H Freq	Horizontal Frequency
V Freq	Vertical Frequency
Measure Mode	Select between Default and User Define

8.5.9.1 Setting an Input to a Non-standard Resolution (Example)

When connecting a source with a non-standard resolution, you have to set your scaler to this resolution so it will correctly identify this source. The Advanced mode lets you set up to three non-standard resolutions. To set an input to a non-standard resolution, for example to 1100x800, do the following:

1.Connect the source (with the non-standard resolution, in this example – 1100x800) to the appropriate input connector on your scaler and press the appropriate INPUT SELECTOR button.

2.Connect the VIDEO OUT 1/2 HD15F connector to a video acceptor.

3.Turn the machines ON.

4.Press menu, go to Utility>Advanced> User Define Measure, and press

ENTER.

5.Scroll to Measure Mode, press ENTER and select User Define.

6.Set H Active to 1100 and V Active to 800, and set the remaining parameters according to the input data.

7.Scroll to the Save Mode and save the new resolution.

8.Open the Information screen and check that the new resolution appears in the Main Source line1 (see Figure 43).

1 Note that for the Scaler to correctly read the input, its OCLK value should be different from that of any other defined input of the scaler

40 KRAMER: SIMPLE CREATIVE TECHNOLOGY