Kramer Electronics VP-719xl Toggling between the PIP and the Screen Source Swap, Resizing the PIP

Presentation Switcher / Scaler Buttons

7.2.4Toggling between the PIP and the Screen Source (SWAP)

To toggle back and forth between the PIP Source and the main display, do the following:

￿￿Press the SWAP key on the infra-red remote control transmitter (see Figure 16).

The OSD SWAP status appears superimposed over the top right corner of the screen for a few seconds1 only when the Source Prompt is ON, as Figure 13 illustrates.

SWAP

Auto(NTSC System)

Main: YC-1

PIP : DVI

SWAP

Auto(NTSC System)

Main: DVI

PIP : YC-1

Figure 13: OSD SWAP Status

7.2.5PIP Characteristics

You can determine the following PIP characteristics:

￿￿The PIP Size (1/4, 1/9, 1/16, 1/25, Split or User Define)

￿￿The Horizontal and Vertical position, letting you place the PIP anywhere on the screen

7.2.5.1 Resizing the PIP

To resize the PIP (1/4, 1/9, 1/16, 1/25, User Define or Split ￿ see the example in Figure 14):

￿￿When the PIP is enclosed by an orange frame, use the UP and/or DOWN navigation control keys on the infra-red remote control transmitter (see Figure 16) or the UP and/or DOWN front panel OSD buttons; otherwise

￿￿Use the OSD Menu buttons

1 By default, 20 seconds. But you can reset the timeout (from 3 to 60 seconds), see section 8￿ .5.6

19