IBM PS1500 owner manual Selecting Single Sounds, Press one of the Select buttons

Selecting Single Sounds

Selecting Single Sounds

To assign a Sound to a keyboard track (Upper 1, Upper 2 or Lower) in Style/Preset mode, you must first select the track with the SELECT buttons (Upper 2, Upper 1; Lower) located to the right of the display. The SELECT buttons enable the dis- played keyboard tracks for a Sound change. A selected track is shown flashing and only one section at a time can be in an enabled state. A selected track (flashing) is not necessarily active for play.

To assign a Sound to any track, including one not displayed and regardless of the current mode, you must first enter Edit Preset mode (press the Preset button) to enter the ProgramChange page. The procedure is explained in detail on page 11.

Assign a Sound to a keyboard track

1.Press one of the SELECT buttons.

A Press UPPER 2 to select the Upper 2 key- board track;

B Press UPPER 1 to select the Upper 1 key- board track;

C Press UPPER 1 + UPPER 2 together to select the LOWER keyboard track.

2.Press a SOUND GROUPS button.

The display shows a bank of 8 Sounds be- longing to the selected Group. The current Sound Bank is shown in the top left hand corner of the display.

1	UPPER 2
		A
S
E		LOWERd	***********	Bk1: STRING
L
E
		T	Bk1: SLOSTR	Bk1: PIANO1
C
T
	UPPER 1
	UPPER 2	B
S
E		LOWERd	***********	Bk1: STRING
L
E		T	Bk1: SLOSTR	Bk1: PIANO1
C
T
	UPPER 1
	UPPER 2	C
S		d	***********	Bk1: STRING
E
L
		LOWER
E
		T	Bk1: SLOSTR	Bk1: PIANO1
C
T
	UPPER 1
2

SOUND GROUPS

PIANO	MALLET	ORGAN	GUITAR	BASS	STRINGS	ENSEMBLE	BRASS
REED	FLUTE	SYN LEAD	SYN PAD	SYN SFX	ETHNIC	PERCUSSIVE	SFX

Bk1 PIANO2 HONKY EL.PN2 CLAVIN

PIANO1 PIANO3 EL.PN1 HARPSI

Sounds & Presets 4•3