Table of Contents
Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Adjustments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i
Preset mode timing table . . . . . . . . . . . . . . . . . . . . . i TCO’99
•Trinitronâ is a registered trademark of Sony Corporation.
•Macintosh is a trademark licensed to Apple Computer, Inc., registered in the U.S.A. and other countries.
•Windowsâ and
•IBM PC/AT and VGA are registered trademarks of IBM Corporation of the U.S.A.
•VESA and DDCä are trademarks of the Video Electronics Standard Association.
•ENERGY STAR is a U.S. registered mark.
•All other product names mentioned herein may be the trademarks or registered trademarks of their respective companies.
•Furthermore, “ä” and “â” are not mentioned in each case in this manual.
Setup
1Connecting your monitor to your computer
xTo connect to the HD15 input connector
to HD15 | video signal cable | to HD15 of the |
| (supplied) | connecting computer |
xTo connect to the 5 BNC connectors
R G B HD VD
video signal cable (not supplied)
Refer to the preceding examples to connect to your computer.
to VIDEO IN R/G/B | to SYNC IN HD/VD |
Connecting to a Macintosh or compatible computer
When connecting this monitor to a Power Mac G3/G4 computer, use the supplied adapter if necessary. Connect the supplied adapter to the computer before connecting the cable. If you connect to another version of Macintosh series computer, having 2 rows of pins, you will need a different adapter (not supplied).
2Turning on the monitor and computer
To select the input signal
You can connect two computers to this monitor using the HD15 and BNC connectors. To select one of the two computers, use the INPUT switch. The selected connector appears on the screen for 3 seconds.
Note
If no signal is input to the selected connector, NO SIGNAL appears on the screen. After a few seconds, the monitor enters the power saving mode. If this happens, switch to the other connector.
To connect Universal Serial Bus (USB) compliant | US | |||
peripherals |
|
|
|
|
Confirm that the monitor and computer are turned on, then |
| |||
connect your computer to the USB connectors ( |
| ) on the right side |
| |
|
| |||
of the monitor. |
|
|
|
|
Connect your computer to the square upstream |
| |||
connector ( ) using the supplied USB cable. |
| |||
If a Windows message appears, follow the |
| |||
and select “Generic USB Hub”. |
|
|
|
|
When connecting your USB compliant peripheral devices (e.g., |
| |||
printer, keyboard, mouse, scanner, etc.) connect the rectangular |
| |||
downstream USB connector ( | ). |
|
|
|
Note
The monitor functions as a USB hub as long as the monitor is either “on” or in power saving mode.
HD15 input connectors
5 4 3 2 1
10 9 8 7 6
15 14 13 12 11
1 Connect the power cord to the monitor and press the
!(power) switch to turn on the monitor.
2 Turn on the computer.
No need for specific drivers
This monitor complies with the “DDC” Plug & Play standard and automatically detects all the monitor’s information. No specific driver needs to be installed to the computer.
The first time you turn on your PC after connecting the monitor, the setup Wizard may appear on the screen. In this case, follow the
Pin No. | Signal |
1 | Red |
|
|
2 | Green (Sync on |
| Green) |
|
|
3 | Blue |
|
|
4 | ID (Ground) |
|
|
5 | DDC Ground* |
|
|
6 | Red Ground |
|
|
7 | Green Ground |
|
|
8 | Blue Ground |
Pin No. | Signal |
9 | DDC + 5V* |
|
|
10 | Ground |
|
|
11 | ID (Ground) |
|
|
12 | |
| Data (SDA)* |
13 | H. Sync |
|
|
14 | V. Sync |
|
|
15 | Data Clock |
| (SCL)* |
|
|
Notes
•Plug and Play is compatible with the HD15 connector only, and not compatible with the 5 BNC connectors.
•Do not touch the pins of the video signal cable connector.
•Check the alignment of the HD15 connector to prevent bending the pins of the video signal cable connector.
* DDC (Display Data Channel) is a standard of VESA.
3