Sony SXRD 4K manual Specifications, Sxrd Device

	Specifications
SXRD DEVICE
Display device	SXRD (Silicon X-tal Reflective Display) panel
Size	1.55 inches, diagonal
Resolution	4096 (H) X 2160 (V) Pixels
Reflectivity	72%
Contrast (device only)	More than 4000:1
Pixel pitch	8.5 μm
Spacing between pixels	0.35 μm
Response speed	5.0 msec (2.5 msec tr + 2.5 msec tf)
Liquid crystal mode	Vertical Aligned Mode
Alignment layer	Inorganic Thin Film
Backplane process	0.35 μm MOS Process
Liquid crystal cell gap	Less than 2 μm
OPTICAL
Projection system	3 SXRD panel, prism color integrated system
Imaging device	SXRD panel
	1.55-inch (diagonal)
	4096 (H) x 2160 (V) pixels on each chip
Lamp	SRX-S110, SRX-R110: 2 kW Xenon lamp x 2
	SRX-S105, SRX-R105: 1 kW Xenon lamp x 2
Screen Coverage (Approx.)	14 feet to 51 feet (4.5 to 15.5 m) (viewable area,
	measured horizontally)
Light output	SRX-S110, SRX-R110: 10,000 lumens ±10%
	SRX-S105, SRX-R105: 5,000 lumens ±10%
	(Since there are multiple methods of measuring brightness, the way
	that brightness is specified will vary among manufacturers.)
GENERAL
Xenon White Reference	X: 0.314, Y: 0.351
Contrast	Greater than 1800:1
Resolution	600 TV lines (SDI input/SMPTE-259M)
	1920 x 1080 pixels (HD-SDI input, SMPTE-292M)
	4096 x 2160 pixels (RGB)
Signal specifications	SRX-S110, SRX-S105:
	Video: SD Component (Y,Cb,Cr)
	HD (RGB; Y/Pb/Pr)
	Computer: XGA, SXGA, UXGA
	DVI-D: XGA, Quad-VGA, SXGA, UXGA, WUXGA, 1920
	x 1080, 2048 x 1080

Page 34