Sony CD-R/RW manual Software Installation, Using Discs

Step 9: Installation Review

Now let us review the hardware installation process, assuring that:

●All connectors are properly connected.

●Each SCSI device has its own unique SCSI ID number.

●The last physical SCSI device on the bus is properly terminated.

1

49

Red Edge

50

Notes

●Red edge of 50 pin flat SCSI cable must be on pin 1 of host adapter.

●The following is a sample configuration of CD-RW installation.

CD-R/W Drive	AUDIO OUT	ID SELECT	DC INPUT
		ACTIVE TERM		Power
		TEST
	R GND L	0 1 2	5V±5% GND 12V±10%
		INTERFACE CONNECTOR		Supply
				Cable
Audio Cable
(included)
		SCSI
		Cable		Red Edge
	(Not included)
		49	1
		50	2

Sound Card
(Not included)	SCSI Card
	(Not included)
Speakers
(Not included)

Step 10: Closing the Computer

Carefully replace computer cover, per Owner’s Manual.

Hardware installation is now complete!

Software Installation

Please refer to CD-RW formatting software/CD manual for instruction on software installation. CD-RW formatting software must first be properly installed in order to write CD’s with this device.

Using Discs

Storing Discs

●Do not store the disc in a location subject to:

–high humidity

–high temperature

–excessive dust

–direct sunlight

Care of Discs

●Only hold disc by its edge. Do not touch the record surface.

●Do not wipe CD-R/RW discs before recording data.

To avoid scratching the recording surface, blow away dust using an air blower.

14 Hardware Installation Software Installation/Using Discs 15